Mercury 1996 Cougar Owner'S Manual Download Page 176 | Manualshive

Page: 176 / 324

background image

175

[DR11900( ALL)05/94]

Ford Motor Company has not found any
detrimental effects of popular mobile radio
transmitting equipment installed on vehicles
with the anti-lock brake system, if the equipment
is installed according to the manufacturer’s
instructions. However, if mobile radio
transmitting equipment is installed in your
vehicle and, if either the anti-lock brake system
cycles or the check anti-lock light comes on at
any time other than right after you turn the key
to ON or during a sudden stop, have your
mobile radio dealer inspect the installation.

%

*

[DR12000( ALL)03/95]

Parking Brake

*

[DR12050( ALL)01/95]

The parking brake should be used whenever
you park your vehicle.

[DR12500( BCGV)03/95]

The parking brake pedal is suspended just below
the bottom of the instrument panel to the left of
the brake pedal.

[DR12900( BC )03/95]

To set the parking brake while parking your
vehicle, apply the brake pedal with your right
foot and hold it while you push the parking
brake down firmly with your left foot. The brake
system warning light will glow.

[DR13500( BC )03/95]

one third page art:0010315-A

The parking brake

File:rcdrc.ex

Update:Mon Jun 12 16:47:03 1995

«
...
174
175
176
177
178
...
»

Summary of Contents for 1996 Cougar





































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Cougar

Brand: AC Schnitzer Pages: 16

Brand: Pacbrake Pages: 9

Brand: Hama Pages: 6

Brand: Jeep Pages: 5

Brand: Jeep Pages: 6

Grand Cherokee SRT 2014

Brand: Jeep Pages: 345

Grand Cherokee 2015

Brand: Jeep Pages: 236

Brand: Jeep Pages: 18

Brand: Jeep Pages: 24

Brand: Jeep Pages: 560

Brand: Jeep Pages: 525

Brand: Jeep Pages: 308

Brand: Jeep Pages: 86

Brand: Jeep Pages: 638

Brand: Jeep Pages: 9

Brand: Jeep Pages: 51

Brand: Jeep Pages: 4

Brand: Jeep Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands