Mercury 1996 Cougar Owner'S Manual Download Page 119

Page: 119 / 324

118

[FV15700( ALL)01/95]

Seats

[FV15710( ALL)04/95]

Head Restraints

[FV15720( ALL)04/95]

If you use them properly, head restraints will
help protect your head and neck in a collision.

[FV15730( ALL)05/95]

A head restraint helps protect you best if you
position it behind your head and not behind
your neck.

[FV15740( ALL)02/95]

Standard head restraints

[FV15750( ALL)01/95]

You can adjust the head restraints for your
comfort and protection.

[FV15770( ALL)05/92]

one third page art:0010048-C

Adjusting the head restraint

% [FV15800(MBC )06/93]

Adjusting Manual Seats

[FV16000( ALL)02/89]

In the front seats, you can move the whole seat
forward or backward or tilt the back of the seat
forward or backward.

[FV16100(MBC )05/92]

To move the seats forward or backward:

[FV16200( BCGV)04/95]

Find the adjustment bar underneath the front
part of the seat.

[FV16400( BCGV)04/95]

Lift the bar to unlatch the seat.

[FV16600( ALL)04/95]

Move the seat to the desired position.

File:rcfvc.ex

Update:Wed Jun 28 16:53:30 1995

Summary of Contents for 1996 Cougar





































































































































































































































































































































Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands

Mercury 1996 Cougar, Owner'S Manual

Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands