Mercury 1996 Cougar Owner'S Manual Download Page 281

Page: 281 / 324

283

% [SV48900( BCGV)06/94]

To remove the high-mount brakelamp:

[SV49200( BC )01/89]

Slide the trim cover toward the front of the
vehicle to disengage the retaining clips.

[SV49500( BC )01/89]

Twist the socket counterclockwise and
remove from lamp.

[SV50015( BC )03/91]

Pull bulb out of socket.

[SV50100( BC )01/89]

Remove the retaining screw.

[SV50200( BC )01/89]

Lift the lamp above the carpet and slide
away from the rear window.

[SV50260( BC )05/94]

Replace the burned out bulbs.

[SV50300( BCGV)02/95]

To install the high-mount brakelamp:

[SV50400( BC )01/89]

Slide the lamp into slots, toward the rear
window.

[SV50700( BC )01/89]

Install the screw.

[SV51000( BC )01/89]

Push bulb into the socket.

[SV51300( BC )01/89]

Install the bulb and socket into the lamp and
twist socket clockwise until it locks.

[SV51500( BC )01/89]

Slide the trim cover toward rear of vehicle
to engage the retaining clips.

File:rcsvc.ex

Update:Mon Jun 12 16:45:15 1995

Summary of Contents for 1996 Cougar





































































































































































































































































































































Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands

Mercury 1996 Cougar, Owner'S Manual

Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands