Mercury 1996 Cougar Owner'S Manual Download Page 128

Page: 128 / 324

127

[FV30200(MBC )01/95]

Console

[FV30350(MBC )06/93]

Your vehicle has a full console. The full console
has the features shown in the illustration below.

[FV30500( BC )03/95]

half page art:0010282-E

The features on the full console

[FV32875( ALL)01/95]

Storage Compartments

[FV32905( BC )07/93]

In addition to the console, your vehicle may
have several small storage compartments:

[FV33000( BCGV)11/94]

❑

a glove compartment that locks. Use the
round key to lock and unlock it.

[FV33100( BCGV)01/95]

❑

two map pockets on the panels of the front
doors.

[FV33300( ALL)05/95]

WARNING

Do not put objects on the ledge between
the back seat and the rear window, as
they can become dangerous projectiles and
injure someone.

File:rcfvc.ex

Update:Wed Jun 28 16:53:30 1995

Summary of Contents for 1996 Cougar





































































































































































































































































































































Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands

Mercury 1996 Cougar, Owner'S Manual

Search results

Summary of Contents for 1996 Cougar

Reviews:

Related manuals for 1996 Cougar

Brands by name

Popular brands