Mercury 1996 Cougar Owner'S Manual Download Page 196 | Manualshive

Page: 196 / 324

background image

196

%

*

[RE07300( ALL)03/95]

Preparing to Change the Tire

*

[RE07525( BCGV)03/95]

1.

Make sure that your vehicle will not move
or roll. Put the gearshift in P (Park). Set the
parking brake and block the wheel that is
diagonally opposite the tire that you are
changing.

[RE07550( BCGV)05/95]

When one of the back wheels is off the ground,
the transmission alone will not prevent the
vehicle from moving or slipping off the jack,
even if the vehicle is in P (Park). To prevent the
vehicle from moving when you change a tire, be
sure the parking brake is set, then block the
wheel (both directions) that is diagonally
opposite (other side and end of the vehicle) to
the tire being changed.

*

[RE07560( ALL)05/95]

R

WARNING

If the vehicle slips off the jack, you or
someone else could be seriously injured.

*

[RE07875( ALL)05/95]

R

WARNING

To avoid injury, never run the engine
with one wheel off the ground, such as
when changing a tire.

*

[RE07900( ALL)05/95]

2.

Get out the spare tire and jack.

[RE08000( BC )11/92]

3.

Remove any optional wheel covers or
hubcaps with the tapered end of a wheel nut
wrench. Insert the handle of the wrench and
twist it against the inner wheel cover flange.
For more about removing wheel covers, see
the information later in this chapter.

File:rcrec.ex

Update:Mon Jun 12 16:46:41 1995

«
...
194
195
196
197
198
...
»

Summary of Contents for 1996 Cougar





































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Cougar

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: Warrior Winches Pages: 17

KO PROPO RTF 2002 ESC

Brand: Tamiya Pages: 2

Brand: Vauxhall Pages: 323

Brand: Subaru Pages: 3

Green Motion DC 66

Brand: Eaton Pages: 18

Brand: Whipple Pages: 3

Brand: Gatorback Mudflaps Pages: 4

Brand: Whispbar Pages: 15

Brand: Veigel Pages: 24

Brand: Cellular Line Pages: 25

Brand: CALIMA Pages: 9

Brand: Sears Pages: 41

Vehicle Asset Communicator

Brand: I.D. Systems Pages: 41

HU-4421-XL-SDK01

Brand: FALCON RIDGE Pages: 5

Brand: Omix-Ada Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands