BATTERY CHARGING AND STARTING SYSTEMS
Page 2B-14
90-826883R2 JUNE 1998
Commander 2000 Key Switch Test
1. Disconnect remote control wiring harness and instrument panel connector.
2. Set ohmmeter on R x 1 scale for the following tests:
KEY
POSITION
OFF
RUN
START
CHOKE*
CONTINUITY SHOULD BE INDICATED AT THE FOLLOWING POINTS:
BLK
BLK/YEL
RED
YEL/RED
PUR
YEL/BLK
*NOTE: Key switch must be positioned to “RUN”or “START”and key pushed in to
actuate choke for this test.
3. If meter readings are other than specified in the preceding
tests,
verify that switch and
not wiring is faulty. If wiring checks ok, replace switch.