JET DRIVE
Page 6B-22
90-826883R2 JUNE 1998
Liner Replacement
1. Mark the liner mounting bolts for reassembly into the same holes. Remove the bolts.
2. Remove the liner. If the liner is tight, tap on the inner edge of the liner with a long drift
punch through the intake grate.
NOTE:
Apply grease to the liner mounting bolt threads before assembly.
3. Position the liner into the water intake housing. Line up one of the liner bolts and lightly
thread it in. It may be necessary to tap or press the liner into the water intake housing
to locate the liner for installation of the remaining bolts. Torque bolts to 100 lbs. in.
(11.3 N·m).
4. Grind off the ends of any bolts that may extend beyond the inner liner surface.
