manualshive.com logo in svg

MerCruiser Vazer 100, Owner'S Manual

Share
Download
MerCruiser Vazer 100 Owner'S Manual Download Page 62

Section 5 - Maintenance 

Page  54

90-899883182   NOVEMBER  2007

Owner/Operator Responsibilities

It is the operator's responsibility to perform all safety checks, to ensure that all lubrication

and maintenance instructions are complied with for safe operation and to return the unit to

an authorized Mercury MerCruiser dealer for a periodic checkup.
Normal maintenance service and replacement parts are the responsibility of the owner/

operator and as such, are not considered defects in workmanship or material within the

terms of the warranty. Individual operating habits and usage contribute to the need for

maintenance service.
Proper maintenance and care of your power package will ensure optimum performance

and dependability and will keep your overall operating expenses at a minimum. See your

authorized Mercury MerCruiser dealer for service aids.

Dealer Responsibilities

In general, a dealer's responsibilities to the customer include predelivery inspection and

preparation such as:
• Ensure that the boat is properly equipped.
• Prior to delivery, make certain that the Mercury MerCruiser power package and other

equipment are in proper operating condition.

• Make all necessary adjustments for maximum efficiency.
• Familiarize the customer with the on‑board equipment.
• Explain and demonstrate the operation of the power package and boat.
• Provide you with a copy of a Predelivery Inspection Checklist.
• Your selling dealer should fill out the Warranty Registration Card completely and mail

it to the factory immediately upon sale of the new product.

Maintenance

!

 WARNING

Performing  service  or  maintenance  without  first  disconnecting  the  battery  can  cause

product  damage,  personal  injury,  or  death  due  to  fire,  explosion,  electrical  shock,  or

unexpected engine starting. Always disconnect the battery cables from the battery before

maintaining, servicing, installing, or removing engine or drive components.

!

 WARNING

Fuel  vapors  trapped  in  the  engine  compartment  may  be  an  irritant,  cause  difficulty

breathing,  or  may  ignite  resulting  in  a  fire  or  explosion.  Always  ventilate  the  engine

compartment before servicing the power package.

IMPORTANT:  See  the  maintenance  schedule  for  a  complete  listing  of  all  scheduled

maintenance to be performed. Some listings can be done by owner and operator, while

others  should  be  performed  by  an  authorized  Mercury  MerCruiser  dealer.  Before

attempting maintenance or repair procedures not covered in this manual, purchase and

read a Mercury MerCruiser Service Manual.

NOTE: Maintenance points are color coded for ease of identification. See the decal on

engine for identification.

Summary of Contents for Vazer 100























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands