62
setting channels
In channel settings it is possible to change the particle
size of the channel in increments of 0,1 µm. For example
the 0,3 µm channel can be set into 0,4 µm.
Touch a channel and you will get the following screen.
NOTe
All compliance reports are based on the preset values.
Only very experienced operators should alter the
particle sizes.
To Change the Particle
detection size press here
Summary of Contents for 1.44093.0001
