Merck 1.44093.0001, Operation Manual

Page: 3 / 88

3
Contents
Safety Information 4
I. Symbols 4
Safety 4
Laser safety 4
Labels 4
Description of Caution/Warning symbols 5
Caution or warning symbols 5
Important information 5
II. Warnings and precautions 5
Introduction and Unpacking 6
Introduction 6
Delivery check 6
Optional accessories 8
Getting Started 9
Rear panel 9
Connection ports 9
Power supply connection 10
Turning on the instrument 10
Battery indicator 11
Setting the screen contrast 11
Settings 12
Status screen 13
System settings 13
Language selection 14
Time format 14
Setting the time 14
Setting the date 15
Setting date format 15
Setting date and time using the screen keyboard 16
Setting instrument name 17
Calibration lock 17
Calibration alarm 18
Selecting flow rate (Dual flow only) 19
Calibration sheet 19
LAN (Local Area Network) connections IP address 20
Automatic method 21
Manual method 22
Installing And Using Zero Count Filter 28
Zero Count Filter 28
Installation steps 28
Remove instrument protective cap 28
Remove protective cover from Zero Count Filter 29
Fitting Zero Count Filter to instrument 29
Purge System 30
Setting Purge Timer 30
Setting Purge Wait Timer 32
Setting Count Timer 34
Setting Timer 35
Starting Purge Cycle 38
Removal of Zero Count Filter 40
Normal Purge Cycle Operation 40
Installing and Using the Isokinetic Probe 41
100 Litre isokinetic probe 41
Installation steps 41
Pre-programmed sample 43
Result reports 46
Report Range Selection 47
Report Type Selection Range 48
FS 209 (range) 48
ISO 14644 (range) 49
GMP (range) 49
Average/Min/Max (range) 49
Printing reports 50
Report place, building or room 50
Report type selection locations 52
FS 209 (Location) 52
ISO 14644 (Location) 53
GMP (Location) 53
Average/Min/Max (Location) 53
Memory 54
Report Type Selection Memory 55
FS 209 (Memory) 56
ISO 14644 (Memory) 56
GMP (Memory) 56
Average/Min/Max (memory) 57
Clear records 58
Count Mode 59
Setting concentration/counts 60
Selecting differential or cumulative 61
Recipe 61
Setting channels 62
Setting channel alarms 64
Action Limits 65
Alarm tone 66
Printer 66
New Measurement Point 67
USB interface 71
USB stick icon 71
Import/Export via USB 71
Export data 72
Import data 73
User 74
Compressed Gas Adapter (CGA) 76
Selection of the Orifice 77
Installation of the Orifice 77
Wall Mount 78
Connection to a Pressurized Line 78
CGA Fitting to Particle Counter 78
Maintenance 80
CGA Technical Specifications 81
Adding New Printer Paper 82
Maintenance 83
Maintenance and calibration Schedule 83
Troubleshooting 84
Contacting Customer Service 85
Appendix A Specifications 86