10
11
11
18
P 6
Please retain product label and instructions for future reference
Step 11
Parts needed - &
Fix Fascias
(No. 11)
and Finials
(No. 18)
using 40mm screws.
Pre drill holes to avoid splitting. Ensure to
the trap the felt between the fascia and
building.
12x40mm screws
40mm
screw
Step 9
Cut the Felt into 3 sheets and lay onto
roof as shown in diagram ensuring there is a
50mm overhang around the sides.
Fix using felt tacks at 100mm intervals.
60x Felt Tacks
Felt
tacks
Step 10
Parts needed -
At the back of the building, fix the two
Cover Trims
(No. 10)
to either end of the
side panels.
Use 3x30mm screws per trim.
3x30mm screws
30mm
screw
11
11
18
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
10
18
11
Step 12
Parts needed -
Place a Window Cross
(
No. 22
)
against the
inside of each window. Position the frame
centrally to the window and fix using
4x20mm screws per frame.
15x20mm screws.
20mm
screw
1!
2!
Pre drill
hole
22
22
