P 4
Please retain product label and instructions for future reference
1!
2!
Pre drill
hole
Step 1
Parts needed - &
To fix the Windows (
No. 21
) into the panels
that accomodate a window. First fix the
Window Block to the Window as shown
with 1x30mm screw.
Place the Window into the window hole
and fix by screwing though the Window
Block (
No. 19
) with 2x30mm screws as
shown.
Screw into the Window first.
18x30mm screws.
30mm
screw
Step 2
Parts needed - & &
Lay the Floor Joists
(No. 7)
under the
floor OSB with an even space
between each one. Position joists
flush on one side of the Floor OSB
(No. 6)
and mark centers of joists onto
either end . Fix using 4 x 30mm
screws per joist.
Place the Veranda Boards
(No. 8)
along the joists and against the floor
sheet. Spread them evenly making
sure the end board is flush with the
framing. Fix using 2 x 30mm screw for
each board along the dotted lines
shown on the illustration.
50x30mm screws
30mm
screw
6
8
7
Step 3
Parts needed - &
Fix the corners with 50mm screws as
shown in diagram.
Do not secure the building to the floor
until the roof is fitted.
Position the Plain Gable
(No. 4)
and Left
Window Side (
No. 2
) so there is equal
spacing between the floor and cladding
on all 4 sides.
3x50mm screws
50mm
screw
3
1
2
4
19
21
6
8
7
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
2
4
50mm
screw
Step 4
Parts needed - &
Attach the remaining Right Window Side
(
No. 3
) and Door Gable
(No. 1)
using the
same method as shown previously.
Fix with 3x50mm screws at each corner.
9x50mm screws
1
3
1!
2!
Pre drill
hole
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
