Please retain product label and instructions for future reference
Poppy Playhouse
Door Instructions
Step 13
Parts needed - & &
Remove film from both sides of the door
styrene before fitting the window bars.
Place one piece of beading (
No. 26
)
in the top groove and push into the top left
corner. Repeat with a second piece of short
beading and fit into the bottom right corner
of the lower groove. Place the Window Bar B
(
No. 24
) onto the Window Bar A (
No. 23
).
Fit the Window bars into the top and bottom
groove by using a circular motion. The bar
must be central.
Place the remaining beading (
No. 25
) into
the grooves and secure using 30mm screws.
You may want to place a piece of card on
top of the styrene to help avoid any
potential scratching.
14x30mm screws.
30mm
screw
Beading
Beading
26
26
23
24
25
25
25
25
26
26
Step 15
Parts needed - &
Place the Wooden Door Handle
(
No. 14
)
on the outside of door and use a 60mm
screw from the inside to secure. Pre drill hole
first to avoid splitting.
On the inside of the door opening fix the
Ply Door Stop
(
No. 15
)
to the bottom left
corner using 3x20mm screws.
15x20mm screws.
20mm
screw
30mm
screw
14
154
Step 14
Parts needed - &
Position the door centrally to the door
(No. 20)
aperture ensuring any gap is
equal on both sides.
Once you are happy the door is in the
correct position place a Hinge
(No. 17)
at
the top and bottom of the door, ensuring
the screws will go into the framing (in
cases where you have been supplied three
hinges use the third in the middle of the
door) and using 30mm black screws fix
the hinge to the door and the door gable.
14x30mm Black screws
23
26
24
17
20
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
15
14
3!
