Felt
tacks
Please retain product label and instructions for future reference
Please retain product label and instructions for future reference
P 9
Step 13
Cut the roof felt provided into equal
lengths making sure that there is 50mm
of overhang on both sides.
Place the first strip on the back of the
building and lay the second overlaying
the first sheet at the front.
Secure the felt in place with Felt tacks
evenly spaced at 100mm intervals.
8x4 65x Felt tacks
10x4 85x Felt tacks
12x4 105x Felt tacks
Pre drill
hole
Step 14
Fix the Fascias
(No. 17)
to the building
with 3x30mm screws per Fascia.
Some Fascias will need to be cut down to
fit.
**8x4 building shown**
8x4, 10x4
-12x30mm screws.
12x4
-15x30mmscrews
Pre drill
hole
30mm
screw
Step 15
Fix the Cover trims
(No. 18)
to the
building with 3x30mm screws per Trim.
The rear Cover trims will need to be cut
down to fit.
A Cover trim is provided for each corner
and for each point that a panel meets
anothers.
**8x4 building shown**
8x4
-18x30mm screws.
10x4
-24x30mm screws.
12x4
-27x30mmscrews
Pre drill
hole
30mm
screw
**The following steps are applicable to all buildings.**
HANDLE
WITH CARE
1
2
3
4
*
Cut down
trims to fit
*
Cut down
trims to fit
