P 12
Please retain product label and instructions for future reference
20
HANDLE
WITH CARE
1
2
3
4
Step 19
Parts Needed - No. 20
Using the felt
(No. 20)
, cut out three
strips with the dimensions:
10x8 - 3200mm (L) X 1000mm (W)
12x8 - 3600mm (L) X 1000mm (W)
Place the felt flat onto the roof in the
order that is stated on the diagram
below.
*Ensure there is approximately 50mm
of overhang on each side.
Once the sheets are laid out, fix them
onto the roof with felt tacks spaced
100mm apart.
190 x Felt Tacks
IMPORTANT :
Pre-drill before fixing screws.
1.
2.
3.
Felt
tacks
14
14
14
14
14
14
40mm
screw
Pre drill
hole
Step 20
Parts Needed - No. 14 QTY 6
Using a pencil and a stright edge, measure the Strip
(No.14)
to
1575mm.
Cut along the marked line to make a cover trim measuring 1575mm in
length.
Repeat this for all 6 strips
(No.14)
Arrange the cover trims around the shed so they cover where the panels
join together. Ensure the Trims sit centrally over the join, as shown in the
illustration.
Secure in place using 3x40mm screws per cover trim.
18 x 40mm Screws
IMPORTANT :
Pre-drill before fixing screws.
*
trim to fit
