background image

 Assembly of Crib Playhouse

 

 

Hammer

 

Step ladder

 

Sand paper

 

Battery-powered drill/screwdriver

 

8mm drill

 

Pencil

 

Tape measure

 

Gloves

 

Sharp knife and saw

        

IMPORTANT! 

PLEASE READ PRIOR TO ASSEMBLY OF 
THE BUILDING 

EVERY PRECAUTION IS TAKEN TO 
ENSURE THAT YOUR BUILDING HAS NO 
ELEMENT INCORRECTLY PLACED OR 
POSSIBLY HAZARDOUS, HOWEVER 
PRIOR TO USE PLEASE CHECK ALL 
SURFACES FOR THE FOLLOWING: 
1 RAISED GRAIN, SPLINTERS: sand 
down timber to smooth finish 
2 NAIL/SCREW/PIN HEADS PROUD: tap 
home to be flush with surface of timber 
3 DAMAGED SCREW HEADS 
RESULTING IN SHARP SPLINTERS OF 
METAL: replace 
4 SHARP ENDS OF NAILS/ SCREWS/ 
PINS PROTRUDING THROUGH THE 
PANEL: remove and reposition. 
5 ENSURE ALL PARTS ARE SECURED 
AGAINST REASONABLE FORCE: 
remove and refit 
6 ENSURE THERE ARE NO LOOSE 
PARTS: remove and refit/discard 

We recommend that protective 
gloves be worn throughout

 

Wood is a natural product and is therefore 
prone to changes in appearance, including 
some warping, movement and splitting, 
particularly during unusual climatic conditions 
(long hot or wet spells of weather). As a natural 
occurrence this is not covered by a guarantee. 

     

PLEASE NOTE

 

7/

0

9/

0

   

TOOLS REQUIRED 

2540

1720

1240

2090

FLO O R   P A N E L

577

D O O R

U P S TA IR S  G U A R D   R A IL

1136

1716

1353

1345

1706

R H   S ID E   P A N E L

1720

1720

LH   S ID E   P A N E L

2090

2090

FR O N T  P A N E L

B A C K  P A N E L

1020

1726

R O O F  PA N ELS

770

1310

656

1790

V ER A N D A H

FLO O R

2090

U PS T A IR S

FLO O R

830

655

R H   V E R A N D A H

R A IL

1790

1490

595

655

LH   V E R A N D AH

R A IL

595

Parts 

QTY    DESCRIPTION 

2      First floor support frame  

  44x44x854mm 

12      Glazing 175x175mm 
50      Window beading 177mm 
4      Door beading 44x12x145 
1      Fascia 95x12x1832mm 
1      Fascia profiled 95x12x1800   
2      Fascia 70x12x1142 
1      Fascia profiled 70x12x1140  
2      Cover strip 46x12x1720 

2      Cover strip 46x12x1355   
2      Ring handle 
2      Wooden knob 
2      Roller door catch 
2      Wood block for door catch 
2      Vents 
2      Diamonds 
1      Ladder 
2      Shutters 
7  

 ‘L’ shaped bracket 

7      False hinges 

64      60mm screws 
2      45mm flat head screws 
30      25mm screws 
22      25mm black screws 
8      20mm screws 
14     10 mm black screws 
32      40mm nails 
160    Felt nails 
96     15mm panel pins 
1      Felt roll 8mtr x 1mtr 

Brigstock Road, Wisbech PE13 3JJ 

Adult Assembly Only - do not attempt to modify this building 

PANELS VIEWED 
FROM OUTSIDE 

Thank you and congratulations on the purchase of your Shire garden building. 
We believe that this product will give you many years of excellent service. This is a 
natural product manufactured to a high standard therefore if you have any queries or 
experience any difficulties then please contact our customer service hotline on 

                  

01945 465 295.                                                                                                                

Normal office hours: 8.30 am to 5.00 pm Monday to Friday.  

Preparation of base 

We recommend that the base onto which your building will stand should be at least 
75mm larger in each direction than the total floor size of the building. 
Floor area of the building: 2090x1790 (7’x6’) excluding verandah. 
Total height clearance: 2351mm 
The chosen position in your garden for the siting of the building should be  excavated to 
a depth of 75mm to allow a base of sand, on to which paving slabs can be evenly laid - 

THEY MUST BE LEVEL AND FIRM.

 

Treatment/care of your Garden Building 

Treat with a suitable decorative wood finish immediately. We recommend that all timber 
pieces be treated again prior to assembly and again within 3 months of  assembly. We 
further recommend that all pieces are treated again at least annually or as frequently as 
the instructions on the product used recommends. 
We would suggest that all wall panels be treated in an upside-down position to allow 
the finish/treatment to ingress into the tongue and groove jointing. 
We would also remind you that you would rarely (if ever) be able to re-treat the 
underside of the floor following assembly. We strongly recommend that the underside 
of the floor is treated an absolute minimum of twice (not including pre-treatment). 

Garden buildings are not waterproof, therefore on assembling building we  
recommend using a silicon based sealant between wall panels and between wall 
panels and floor. 

Reviews: