P 13
Please retain product label and instructions for future reference
40mm
screw
Pre drill
hole
Step 21
Parts Needed - No. 13 QTY 1
Locate the cover trim
(No. 13)
on
the back of the shed so it covers
where the plain gable panels join
together. Ensure the Trim sits
centrally over the join, as shown in
the illustration.
Secure in place using 3x40mm
screws.
3 x 40mm Screws
IMPORTANT :
Pre-drill before fixing screws.
13
40mm
screw
Pre drill
hole
Step 22
Parts Needed - No. 15 QTY 1
Using a pencil and a straight edge,
measure the Strip
(No.15)
to create
two 237mm length strips.
Cut along the marked lines to make
two cover trims measuring 237mm
in length.
Locate the cover trims onto the
front gable, so they cover where the
panels join together. Ensure the
Trims sit centrally over the join, as
shown in the illustration.
Secure in place using 3x40mm
screws per cover trim.
6 x 40mm Screws
IMPORTANT :
Pre-drill before fixing screws.
15
15
*
trim to fit
