Mercedes-Benz S 450 4MATIC Operator'S Manual Download Page 632

Page: 632 / 801

631

Practical hints

What to do if …?

Problem

Possible cause/consequence

Suggested solution

;

(USA only)

(Canada only)

The red brake warning
lamp comes on while the
engine is running and an
acoustic warning sounds.

There is insufficient brake fluid in the reser-
voir.

Risk of accident!

왘

Carefully stop the vehicle in a safe loca-
tion or as soon as it is safe to do so.

왘

Engage the electronic parking brake
(

컄

page 422).

왘

Contact an authorized Mercedes-Benz
Center.

왘

Do not add brake fluid! This will not
solve the problem.

Warning!

Driving with the brake warning lamp illumi-

nated can result in an accident. Have your

brake system checked immediately if the

brake warning lamp stays on. Do not add

brake fluid before checking the brake

system. Overfilling the brake fluid reservoir

can result in spilling brake fluid on hot en-

gine parts and the brake fluid catching fire.

You can be seriously burned.

If you find that the brake fluid in the brake

fluid reservoir has fallen to the minimum mark or
below, have the brake system checked for brake
pad thickness and leaks.

Summary of Contents for S 450 4MATIC


































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S 450 4MATIC

Reviews:

Related manuals for S 450 4MATIC

Brands by name

Popular brands

Mercedes-Benz S 450 4MATIC, Operator'S Manual

Search results

Summary of Contents for S 450 4MATIC

Reviews:

Related manuals for S 450 4MATIC

Brands by name

Popular brands