Mercedes-Benz S 450 4MATIC, Operator'S Manual

Page: 373 / 801

372
Controls in detail
Starter switch positions
The SmartKey with KEYLESS-GO must be
located in the vehicle.
왘
Make sure the automatic transmission
is set to park position
P .
왘
Do not depress the brake pedal.
KEYLESS-GO start/stop button
1
USA only
2 Canada only
Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have status
0 (as with
SmartKey removed).
Position 1
왘
Press the KEYLESS-GO start/stop but-
ton once.
This supplies power for some electrical
consumers.
Ignition (or position 2)
왘 Press the KEYLESS-GO start/stop but-
ton twice.
This supplies power for all electrical
consumers.
All lamps (except high beam headlamp
indicator lamp and turn signal indicator
lamps unless activated) in the instru-
ment cluster come on. If a lamp in the
instrument cluster fails to come on
when the ignition is switched on, have
it checked and replaced if necessary.
If a lamp in the instrument cluster re-
mains on after starting the engine or
comes on while driving, refer to “Lamps
in instrument cluster” (
컄
page 628).
For information on starting the engine us-
ing the KEYLESS-GO start/stop button,
see “Starting with KEYLESS-GO*”
(
컄
page 417).
i
If you now press the KEYLESS-GO
start/stop button
앫
once again, the ignition (position 2 ) is
switched on
앫
twice, the power supply is again switched off
i
If you now press the KEYLESS-GO
start/stop button once, the power supply is
again switched off.
i
When you switch on the ignition, the indica-
tor and warning lamps (except high beam head-
lamp indicator lamp and turn signal indicator
lamps unless activated) in the instrument cluster
come on. The indicator and warning lamps (ex-
cept high beam headlamp indicator lamp and
turn signal indicator lamps if activated) should go
out when the engine is running. This indicates
that the respective systems are operational.
컄컄