Mercedes-Benz S 450 4MATIC Operator'S Manual Download Page 87

Page: 87 / 801

Control systems

COMAND operating safety

Warning!

Any alteration of electronic components or

software can cause malfunctions.

Radio, satellite radio, amplifier, CD/DVD

changer, navigation module, telephone and

Voice Control Systems* are interconnected.

Therefore, if one of the components is not

operational, or has not been removed/ re-

placed properly, the function of other com-

ponents could be impaired.

Such conditions might seriously impair the

operating safety of your vehicle.

We recommend to have any service work on

electronic components carried out by an au-

thorized Mercedes-Benz Center.

Warning!

In order to avoid distraction which could

lead to an accident, the driver should enter

system settings while the vehicle is at a

standstill, and operate the system only

when permitted by road, weather and traffic

conditions.

Bear in mind that at a speed of just 30 mph

(approximately 50 km/ h), your car covers a

distance of 44 feet (approximately 14 m) ev-

ery second.

COMAND supplies you with information to

help you select your route more easily and

guide you conveniently and safely to your

destination. For safety reasons, we encour-

age the driver to stop the vehicle in a safe

place before answering or placing a call, or

consulting the COMAND screen to read nav-

igational maps, instructions, or downloaded

information.

Warning!

While the navigation system provides direc-

tional assistance, the driver must remain fo-

cused on safe driving behavior, especially

attention to traffic and street signs, and

should utilize the system’s audio cues while

driving.

The navigation system does not supply any

information on stop signs, yield signs, traffic

regulations or traffic safety rules. Their ob-

servance always remains in the driver’s per-

sonal responsibility. DVD maps do not cover

all areas nor all routes within an area.

Summary of Contents for S 450 4MATIC


































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S 450 4MATIC

Reviews:

Related manuals for S 450 4MATIC

Brands by name

Popular brands

Mercedes-Benz S 450 4MATIC, Operator'S Manual

Search results

Summary of Contents for S 450 4MATIC

Reviews:

Related manuals for S 450 4MATIC

Brands by name

Popular brands