Mercedes-Benz S 450 4MATIC, Operator'S Manual

Page: 178 / 801

177
Control systems
COMAND telephone*
If “ Navigate ” is selected, a message ap-
pears indicating that the address is incom-
plete.
왘
Closing message: Select “ OK ”.
Depending on which data is missing or
cannot be found on the digital map, you
must now either:
앫
select a state (province)
앫
select a county
앫 or enter a city
앫
or enter a street
앫 or enter a house number
왘
Selecting a state (province):
Select desired state (province) from
the list.
왘
Selecting a county: Select desired
county from the list.
왘
Entering a city: Proceed as described
for destination entry in the “Entering a
city” section (
컄 page 208).
왘
Entering a street: Proceed as de-
scribed for destination entry in the “En-
tering a street” section (
컄
page 211).
왘
Entering a house number: Proceed
as described for destination entry in
the “Entering a house number” section
(
컄
page 216).
If all data is available and matches the dig-
ital map data, the navigation system starts
the route calculation.
Voice entries
Adding or changing a voice entry
왘
Search for the address book entry with
or without a voice entry (
컄
page 170).
왘
Select “ Options ” “ Voice Name ”
“ Add ” or “ Change ”.
Subsequent operation is controlled by
voice. Voice Control guides you
through the dialogs.
i
If you have added data, COMAND saves your
additions. This means that you do not need to
re-enter this additional data later on.
The COMAND memory saves the additional data
in a special field, which cannot be displayed. The
data, which you have entered in the address
book initially in the display, remains unchanged.
i
For voice entries, your vehicle must be
equipped with Voice Control. You can not add
voice entries to address book entries that have
been read-in from the phone book of the mobile
phone.
i
You can add one voice entry per address
book entry.