Seats
77
X
Position 1: press KEYLESS GO button
1
once.
It is now possible to switch on the wind-
screen wipers, for example.
i
If you press KEYLESS GO button
1
in this
position twice, the power supply is discon-
nected again.
X
Position 2 (ignition): press KEYLESS GO
button
1
twice.
i
If you press KEYLESS GO button
1
in this
position once, the power supply is discon-
nected again.
Removing the KEYLESS GO button
You can remove the KEYLESS GO button from
the ignition lock and start the vehicle with a
key as usual.
i
Switching between KEYLESS GO mode
and key mode is only possible when the
transmission is in position P.
1
KEYLESS GO button
2
Ignition lock
i
If you switch from using the key back to
KEYLESS GO mode, the system requires 2
seconds' recognition time before you can
use the KEYLESS GO button as usual.
i
You do not need to remove the KEYLESS
GO button from the ignition lock when you
leave the vehicle.
Seats
Points to remember
You will find information about folding down
the rear bench seat in the "Luggage compart-
ment enlargement" section (
Y
page 190).
Depending on the vehicle's equipment, the
seats can adjusted either manually/electri-
cally or electrically*.
G
Risk of injury
The seats can still be adjusted when there
is no key in the ignition lock. For this rea-
son, children should never be left unsuper-
vised in the vehicle. They could become
trapped when adjusting a seat.
G
Risk of accident
Only adjust the driver's seat when the vehi-
cle is stationary. You will otherwise be dis-
tracted from the road and traffic conditions
and you could lose control of the vehicle as
a result of the seat moving. This could
cause an accident.
G
Risk of injury
Make sure that nobody can become trap-
ped when you adjust the seat.
Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 77
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight
