Battery
325
Disconnecting the battery
G
Risk of accident
If the battery is disconnected:
R
the brake boosting effect will not be avail-
able. Greater braking force will then be
required and the brake pedal travel will
be longer. If necessary, depress the
brake pedal with maximum force.
R
you can no longer turn the key in the igni-
tion and, on vehicles with KEYLESS
GO*, pressing the KEYLESS GO button*
will have no effect
R
the selector lever is locked in position P
!
Always disconnect the battery in
the order described below. Never swap the
terminal clamps. You may otherwise dam-
age the vehicle electronics.
X
Firmly depress the parking brake and shift
the DIRECT SELECT lever to position P.
X
Switch off the engine.
X
Turn the key to position 2 (
Y
page 76)in the
ignition lock.
X
Switch off all electrical consumers.
X
Open the front right-hand door.
X
Position the right-hand front seat at its rear-
most position:
R
partially electric seat adjustment
(
Y
page 78)
R
fully electric seat adjustment
(
Y
page 79)
1
Front right seat rail cover
2
Front left seat rail cover
X
Pull right-hand cover
1
forwards in the
direction of the arrow and pull it off the seat
rail.
X
Pull left-hand cover
2
as far forwards as
possible in the direction of the arrow.
i
Left-hand cover
2
cannot be completely
pulled off the seat rail.
3
Battery cover fastening nuts
X
Loosen and remove fastening nuts
3
along the edge of the carpet.
i
To do this, you need a 6 mm Allen key with
a shaft at least 30 cm long (not included in
the vehicle tool kit).
X
Position the right-hand front seat as far
forward as possible:
R
partially electric seat adjustment
(
Y
page 78)
R
fully electric seat adjustment (
Y
page 79)
X
Turn the key to position 0 (
Y
page 76) in
the ignition lock.
Practical advice
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 325
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight
