Care
248
Cleaning the reversing camera*
1
Camera lens
X
Use clear water and a soft cloth to clean
camera lens
1
.
!
Do not clean the camera lens and the area
around the reversing camera with:
R
high-pressure cleaning equipment
R
a dry cloth and a lot of pressure
R
corrosive cleaning products
You could otherwise damage the reversing
camera.
Trailer coupling
The ball coupling must be cleaned if it
becomes dirty or corroded.
X
Remove any rust using a wire brush.
X
Remove dirt with a clean, lint-free cloth or
a brush.
!
Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
1
Ball neck head
2
Locking balls
3
Guide pin
4
Guide faces
5
Release lever
6
Protective cap
X
Lightly oil or grease positions
1
to
6
and
the ball coupling recess of the vehicle after
cleaning.
X
Treat the lock under protective cap
6
with
an acid- and resin-free oil.
X
Check that the vehicle's trailer coupling is
working properly.
!
Observe the note on care provided by the
trailer manufacturer.
i
Maintenance of the ball coupling and
trailer coupling can also be performed by
any Mercedes-Benz Service Centre.
H
Environmental note
Dispose of oily and greasy cloths in an envi-
ronmentally-responsible manner.
Operation
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 248
Dateiname: 6515_1825_02_buchblock.pdf;
preflight
