Changing the bulbs
307
Front bulbs
Bulb
Type
1
Side lamp/park-
ing lamp
W 5 W
2
Turn signal lamp PY 21 W
3
Additional turn
signal lamp
LEDs
35
4
Dipped-beam
headlamps
H7 55 W
36
or
D1S 35 W*
37
5
Main-beam
headlamps
36
/
Main-beam
spotlight*
38
H7 55 W
6
Front foglamps
with cornering
light function*
H7 55 W
Rear bulbs
Bulb
Type
7
Third brake
lamp
LED
35
8
Brake lamp/tail
lamp/parking
lamp
P 21 W
9
Turn signal lamp PY 21 W
a
Reversing lamp P 21 W
b
Rear foglamp*
P 21 W
c
Licence plate
lamp
C 5 W
Before changing bulbs
You can replace the following bulbs:
R
Dipped-beam headlamps (vehicles with
halogen headlamps)
R
Main-beam headlamps (vehicles with halo-
gen headlamps)
R
Side lamp and parking lamp
R
Front foglamps with cornering light func-
tion*
R
Turn signal lamp (front)
R
Reversing lamp
R
Brake lamp/tail lamp/parking lamp
R
Rear fog lamp
R
Turn signal lamp (rear)
R
Licence plate lamp
Observe the following points:
R
Use only the bulb types specified here.
R
To prevent a short-circuit, switch off the
lights before changing a bulb.
R
Only hold bulbs with a clean, lint-free cloth.
R
Do not work with wet or greasy fingers.
R
If the new bulb still does not light up, con-
sult a qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
35
These bulbs must be replaced at a qualified specialist workshop, e.g. a Mercedes-Benz Service Centre.
36
Vehicles with halogen headlamps.
37
Vehicles with xenon headlamps*: always have these bulbs changed at a qualified specialist workshop, e.g. a Mercedes-Benz Service Centre.
38
Vehicles with bi-xenon headlamps*
Practical advice
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 307
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight
