Features
215
X
Use
æ
or
ç
on the multi-function
steering wheel to select the
Vehicle
sub-
menu.
X
Keep pressing
j
or
k
until the
Com-
pass setting Zone
message appears.
The selection marker highlights the current
setting.
X
Use
æ
or
ç
to set the geographical
location.
Calibrating the compass
You will only see this function if Audio 20 is
installed in your vehicle.
In order to calibrate the compass correctly,
observe the following points:
R
find a suitable place where you can drive
the vehicle a full circle.
R
calibrate the compass in the open and not
in the vicinity of steel constructions or high-
voltage transmission lines.
R
switch off electric consumers, e.g.
Thermatic/multi-zone Thermotronic*,
windscreen wipers or rear window heating.
R
close all doors and the tailgate.
X
Start the engine.
X
Use
æ
or
ç
on the multi-function
steering wheel to select the
Vehicle
sub-
menu.
X
Keep pressing
j
or
k
until the
Com-
pass calibration
message appears.
The selection marker highlights
switched
off
.
X
Use
æ
or
ç
to select
Start
.
In the multi-function display, you will see
the
Compass calibration active
Please drive a full circle
message.
X
Drive the vehicle a full circle at approxi-
mately 5 – 10 km/h.
When calibration is completed, you will see
the following message in the multi-function
display:
Compass calibration Comple-
ted successfully
If you do not see the
Compass calibration
Completed successfully
message in the
multi-function display, drive another full cir-
cle. If calibration is not successful within
three minutes of it starting, the
Compass
calibration
message will appear in the
multi-function display again. This means that
compass calibration is impossible because of
external interference. Repeat calibration at
another location.
Floormat* on the driver's side
G
Risk of accident
Make sure that there is sufficient clearance
around the pedals when floormats are
used, and that the floormats are properly
secured.
The floormats must be secured at all times
using retainers and studs.
Before you drive off, make sure that the
floormats are secure and rectify if neces-
sary. A floormat which is not properly
secured can slip and thereby interfere with
the movement of the pedals.
Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 215
Z
Dateiname: 6515_1825_02_buchblock.pdf;
preflight