R
The vehicle is on solid, non-slippery and level
ground.
R
The required tire-change tool kit is available.
%
If your vehicle is not equipped with the tire-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shift the transmission to position
j
.
#
Vehicles with level control system: Set the
normal vehicle level (
/
page 250).
#
Switch off the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
#
Raise the vehicle (
/
page 398).
Additionally, for Mercedes-Maybach vehicles:
#
Retract the running boards (
/
page 79)
#
To remove stone chipping protective covers
2
:
#
Loosen expansion rivet
1
and pull it out.
#
Fold down and remove stone chipping protec-
tive covers
2
.
Removing and installing the wheel trim/hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 396).
Plastic hub cap
#
To remove: turn the center cover of the hub
cap counter-clockwise and remove the hub
cap.
#
To install: make sure that the center cover of
the hub cap is turned counter-clockwise.
#
Position the hub cap and turn the center cover
clockwise until the hub cap engages physically
and audibly.
Wheels and tires 397
Summary of Contents for GLS 2023
