Mercedes-Benz GLS 2023, Operator'S Manual

Page: 309 / 538

• To show Highway Information
• Via Advanced options to use View ,
Announcements and Route
Overview of the toll system
Debiting of toll charges at freeway toll gates is
facilitated with an electronic payment system.
The toll system uses RFID (Radio Frequency Iden-
tification) for data transfer between the control
unit and the toll station.
The toll system is initially switched off at the fac-
tory.
The control unit is in the vehicle glove box.
To register and activate the control unit, the fol-
lowing steps are required:
R
Activate the toll system in the settings of the
MBUX multimedia system.
R
In the Mercedes me App, register the unit
identification number of the control unit and
activate the toll system.
Registration and activation of the toll system
can take up to 24 hours.
When the toll system is activated, the number of
vehicle occupants is first transmitted manually
and is preset with one person.
The number of vehicle occupants can be transmit-
ted automatically. In the process, the number of
seat belts worn is determined.
The toll system is operational in all states in the
USA and in all provinces in Canada.
% In Mexico, for example, the toll system can be
registered and activated for journeys to the
USA.
Notices
R
Drive at the prescribed vehicle speed in the
toll lane.
R
The toll will be debited automatically only after
registration and activation of the toll system.
R
Mercedes-Benz recommends operation using
the MBUX multimedia system. Alternatively,
this can also be done on the control unit in
the glove box.
R
For safety reasons, entries should be made
while the vehicle stationary.
R
For further information, please consult the
Mercedes me app or an authorized Mercedes-
Benz Center.
Or call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Entering a destination
Multimedia system:
4
©
5
Navigation
5
ª Where to?
MBUX multimedia system 307