Mercedes-Benz GLB 2021 Series, Operator'S Manual

Page: 121 / 446

#
Insert cargo compartment floor 1 into rear
fixtures 2 .
#
Fold cargo compartment floor 1 down.
#
To adjust the length: fold the seat backr‐
ests in the rear passenger compartment
forward slightly.
#
Make sure that cargo compartment floor 1
is engaged in the lower position.
#
Press a release catch 5 and remove bracket
4 upwards.
* NOTE Damage to the cargo compart‐
ment floor
If the cargo compartment floor is loaded in
the upper position and the bracket has been
removed, the cargo compartment floor may
be damaged.
#
Make sure that the cargo compartment
floor is not loaded in the upper position
when the bracket has been removed.
Attaching a roof luggage rack
&
WARNING Risk of accident due to
exceeding the maximum roof load
The vehicle center of gravity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If you exceed the maximum roof load, the
driving characteristics, as well as steering
and braking, will be greatly impaired.
#
Never exceed the maximum roof load
and adjust your driving style.
You will find information on the maximum roof
load in the "Technical data" section.
* NOTE Damage to the panorama roof with
power tilt/sliding panel due to non-
approved roof luggage racks
The panorama roof with power tilt/sliding
panel may be damaged by the roof luggage
rack if you attempt to open it when using a
roof luggage rack not tested and approved
for Mercedes-Benz.
#
When a roof luggage rack is installed,
open the panorama roof with power
tilt/sliding panel only if this has been
tested and approved for Mercedes-
Benz.
The panorama roof with power tilt/sliding
panel may be raised to allow ventilation of
the vehicle interior.
#
Secure the roof luggage rack to the roof rail‐
ing.
#
Observe the manufacturer's installation
instructions.
Seats and stowing 119