Mercedes-Benz G 550 2020, Operator'S Manual

Page: 116 / 530

High-beam headlamps
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch beyond the
point of resistance in the direction of arrow
1 .
When the high beam is activated, the L
indicator lamp for low beam is deactivated
and replaced by the K indicator lamp for
the high beam.
#
To switch off: move the combination switch
back to its starting position.
High-beam flasher
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal lights
#
To indicate briefly: press the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal indicator will
flash three times.
#
To indicate permanently: press the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
lamps
#
Press button 1 .
The hazard warning lamps will switch on auto‐
matically if:
R
the airbag has been deployed.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
& WARNING Risk of accident despite
Adaptive Highbeam Assist
Adaptive Highbeam Assist does not recog‐
nize the following road users:
R
Road users without lights, e.g. pedes‐
trians
R
Road users with poor lighting, e.g.
cyclists
R
Road users whose lighting is obstructed,
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
Assist may fail to recognize other road users
with their own lighting, or may recognize
them too late.
114 Light and visibility