Mercedes-Benz EQS 2022, Operator'S Manual

Page: 214 / 538

#
Always make sure that nobody is within
the range of the garage door's move-
ment.
Only operate the following doors using the garage
door opener:
R
Doors with a safety stop and reversing feature
R
Doors which conform to the current U.S.
safety standards
Before programming the garage door opener, park
the vehicle outside the garage. Make sure that the
vehicle is switched on but not started.
RReq
equir uirements: ements:
R
The vehicle has been parked outside the
garage or outside the range of movement of
the door.
R
The vehicle is switched on.
R
The vehicle has not been started.
%
The garage door opener function is always
available when the vehicle is switched on.
#
Check if the transmitter frequency of the
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
R
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
#
Press and hold button 1 , 2 or 3 that you
wish to program.
Indicator lamp 4 ashes yellow.
% It can take up to 20 seconds before the indi-
cator lamp ashes yellow.
#
Release the previously pressed button.
Indicator lamp 4 continues to ash yellow.
#
Point remote control 5 from a distance of
0.4 in (1 cm) to 3 in (8 cm) towards button
1 , 2 or 3 .
#
Press and hold button 6 of remote control
5 until one of the following signals appears:
R
Indicator lamp 4 lights up green continu-
ously. Programming is complete.
R
Indicator lamp 4 ashes green. Program-
ming was successful. Additionally, syn-
chronization of the rolling code with the
door system must be carried out.
#
If indicator lamp 4 does not light up or ash
green: repeat the procedure.
#
Release all of the buttons.
212 212 Driving and parking
www.carobook.com