Mercedes-Benz E Operator'S Manual Download Page 73

Page: 73 / 90

Telephone*

SMS

You can receive, read and delete SMS
messages, provided SMS messaging is
available from your carrier.

If a new SMS has been received, an enve-
lope symbol appears on the right of the
status line.

SMS menu

Call up the Telephone main menu
(

page 60).

Press the

SMS

soft key.

The SMS menu is displayed.

Switching between Sender and Subject

You can have the incoming SMS displayed
with the sender or the subject. If you have
selected the sender, the telephone num-
ber is displayed.

Press the

Subject

soft key.

The start of the SMS is displayed.

Press the

Sender

soft key.

The sender’s phone number is dis-
played.

Selecting message

Call up the SMS menu (

page 69).

Press

to select a message.

In the status line you will be able to see
when the message was received.

Reading message

Select a message (

page 69) and

press

This displays the text of the message.

The caller’s number only appears if it is
transmitted.

Summary of Contents for E



























































































Search results

Summary of Contents for E

Reviews:

Related manuals for E

Brands by name

Popular brands

Mercedes-Benz E, Operator'S Manual

Search results

Summary of Contents for E

Reviews:

Related manuals for E

Brands by name

Popular brands