Mercedes-Benz E 350 BlueEFFICIENCY Cabriolet, Operator'S Manual

Page: 154 / 372

Key positions with KEYLESS-GO
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up. If an indicator lamp does not go out after
starting the engine or lights up while driving,
see (
Y
page 258).
X
Insert Start/Stop button
:
into ignition
lock
;
.
i When you insert Start/Stop button
:
into ignition lock
;
, the system needs
approximately 2 seconds' recognition time.
You can then use Start/Stop button
:
.
Activating power supply
X
Position 0: if Start/Stop button
:
has not
yet been pressed, this corresponds to the
SmartKey being removed from the ignition.
X
Position 1: press Start/Stop button
:
.
The power supply is switched on. You can
now activate the windshield wipers, for
example.
i
If you then open the driver's door when in
this position, the power supply is
deactivated.
Switching on the ignition
X
Position 2 (ignition): press Start/Stop
button
:
twice.
The ignition is switched on.
i
The ignition is switched off when:
R
the driver's door is opened and
R
you press Start/Stop button
:
once
when in this position.
Start/Stop button
=
USA only
?
Canada only
Starting the engine
Important safety notes
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces
without sufficient ventilation.
! Do not depress the accelerator pedal
when starting the engine.
General notes
i The catalytic converter is preheated for
up to 30 seconds after a cold start. The
sound of the engine may change during this
time.
Automatic transmission
X
Shift the transmission to position P.
The transmission position display in the
multifunction display shows
P.
i
You can also start the engine when the
transmission is in position
N.
152
Driving
Driving and parking