&
WARNING Risk of injury due to head
restraints not being fitted or being adjus‐
ted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an
increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
#
Always drive with the head restraints
fitted.
#
Before driving off, make sure for every
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
#
To raise: pull the head restraint up.
#
To lower: press release knob
1
in the direc‐
tion of the arrow and push the head restraint
down.
#
To move forwards: pull the head restraint
forwards.
#
To move backwards: press and hold release
knob
2
.
#
Push the head restraint backwards and let go
of release knob
2
.
Adjusting the head restraints of the rear
seats mechanically
#
To raise: pull the head restraint up.
#
To lower: press release knob
1
in the direc‐
tion of the arrow and push the head restraint
down.
104 Seats and stowing
Internal use only
Summary of Contents for C-Class Saloon 2020
