"Coupling up a trailer" function
:
Vehicle centre point on the yellow guide line
at a distance of approximately 1.0 m from
the rear of the vehicle
;
Trailer drawbar
=
Red guide line at a distance of approximately
0.30 m from the rear of the vehicle
X
Set the height of trailer drawbar
;
so that it
is slightly higher than the ball coupling.
X
Position the vehicle centrally in front of trailer
drawbar
;
.
:
Symbol for the trailer view setting
;
Trailer drawbar locating aid
=
Ball coupling
?
Red guide line at a distance of approximately
0.30 m from the ball coupling
X
Select symbol
:
using the controller.
The "Coupling up a trailer" function is selec-
ted. The distance specifications now only
apply to objects that are at the same level as
the ball coupling.
X
Reverse carefully, making sure trailer drawbar
locating aid
;
points approximately in the
direction of the trailer drawbar.
X
Reverse carefully until the trailer drawbar rea-
ches red guide line
?
.
The distance between the trailer drawbar and
the red guide line is now approximately
0.30 m.
X
Couple up the trailer (
Y
page 227).
i
For technical reasons, the ball coupling of
the trailer tow hitch in the multimedia system
display is either only partially visible or not at
all.
The lines are shown at the level of the trailer tow
hitch.
180° view
:
Symbol for the full-screen setting with the
reversing camera image
;
Own vehicle
=
PARKTRONIC warning displays
i
180° view can also be selected as front
view.
Select this view when you are driving out of an
exit and the view of crossing traffic is restricted,
for example.
i
If you select the
%
symbol in the display
and confirm with the controller, the split-
screen view appears.
Stopping the 360° camera display
The 360° camera display is stopped:
R
when you select transmission position P, or
R
when you are driving at moderate speeds
The view which was active before the 360° cam-
era was displayed appears in the multimedia
display. You can also stop the 360° camera dis-
play split-screen view by selecting the
%
symbol in the display and then confirming with
the COMAND controller.
214
Driving systems
Driving
and
parking
