Important safety notes
G
WARNING
Adaptive Highbeam Assist Plus does not rec-
ognise road users:
R
who have no lights, e.g. pedestrians
R
who have poor lighting, e.g. cyclists
R
whose lighting is blocked, e.g. by a barrier
In very rare cases, Adaptive Highbeam Assist
Plus may not recognise road users who do
have lights, or may recognise them too late. In
this, or in similar situations, the automatic
main-beam headlamps will not be deactivated
or will be activated despite the presence of
other road users. There is a risk of an acci-
dent.
Always carefully observe the traffic conditions
and switch off the main-beam headlamps in
good time.
Adaptive Highbeam Assist Plus cannot take into
account road, weather or traffic conditions.
Adaptive Highbeam Assist Plus is only an aid.
You are responsible for adjusting the vehicle's
lighting to the prevailing light, visibility and traf-
fic conditions.
In particular, the detection of obstacles can be
restricted if there is:
R
poor visibility, e.g. due to fog, heavy rain or
snow
R
dirt on the sensors or if the sensors are
obscured
Switching Adaptive Highbeam Assist
Plus on/off
X
To switch on: turn the light switch to the
Ã
position.
X
Press the combination switch beyond the
pressure point in the direction of arrow
:
.
The
_
indicator lamp in the multifunction
display lights up when it is dark and the light
sensor switches on the dipped-beam head-
lamps.
At speeds above approx. 25 km/h: the
headlamp range is automatically controlled
according to the distance to other road users.
At speeds above approx. 30 km/h:
R
if no other road users are detected, the
main-beam headlamps are automatically
switched on
R
if other road users are detected, the partial
main-beam headlamps are automatically
switched on
The
K
indicator lamp in the instrument
cluster also lights up.
At speeds below approx. 25 km/h or
when there is sufficient street lighting:
R
the partial main-beam headlamps are
switched off automatically
R
the main-beam headlamps are switched off
automatically
The
K
indicator lamp in the instrument
cluster goes out. The
_
indicator lamp in
the multifunction display remains lit.
X
To switch off: move the combination switch
back to its normal position or move the light
switch to another position.
The
_
indicator lamp in the multifunction
display goes out.
Headlamps misted up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of the
headlamp.
122
Exterior lighting
Light
sa
nd
winds
creen
wiper
s