Mercedes-Benz 2010 GLK 350, Operator'S Manual

Page: 313 / 344

X
With wiper arms in vertical position, turn
the SmartKey in the starter switch to
position
0.
X
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO
X
Turn off the engine.
With the driver’s door closed, the starter
switch is now in position
1.
X
Turn the combination switch to wiper
setting
°
.
X
With wiper arms in vertical position, open
the driver’s door.
The starter switch is set to position
0, same
as the SmartKey removed from the starter
switch.
X
Turn the combination switch to wiper
setting
$
.
Removing wiper blades
Front wiper blades
! Do not pull on the wiper blade inserts.
They could tear.
X
Fold the wiper arms forward until they
engage.
X
Turn the wiper blade at a right angle to
wiper arm.
X
Slide the wiper blade sideways out of the
retainer.
Rear wiper blade
! Do not pull on the wiper blade insert. It
could tear.
X
Fold wiper arm
:
away from the rear
window until it engages.
X
Turn wiper blade
;
as far as it will go.
X
Hold wiper arm
:
and disengage wiper
blade
;
by carefully sliding it in direction
of arrow.
X
Remove wiper blade
;
.
Installing wiper blades
Front wiper blades
X
Slide the wiper blade onto wiper arm in
opposite direction of arrow (
Y
page 311).
X
Rotate the wiper blade into position parallel
to the wiper arm.
X
Fold the wiper arm backward to rest on the
windshield.
Make sure you hold on to the wiper when
folding the wiper arm back.
! Make sure the wiper blades are installed
properly. Improperly installed wiper blades
may cause windshield damage.
Replacing wiper blades
311
Practical hints
X204_AKB; 3; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 311
Z