Mercedes-Benz 2010 GLK 350, Operator'S Manual

Page: 169 / 344

Aborting dial or ending a call
X
% Q ¢
and press
W
.
or
X
Press button
~
on the audio control unit
or on the multifunction steering wheel.
Rejecting or accepting calls
You will be notified of an incoming call by the
ringing tone and a message on the display.
i
Depending on the mobile phone you are
using, the audio system’s ringing tone may
differ from the one you have set on your
mobile phone. You may hear
R
the ringing tone set on the mobile phone
R
the audio system’s preset ringing tone
R
the audio system’s preset ringing tone
and the ringing tone set on the mobile
phone
If the caller’s name and number are among
the entries in the audio system’s phone book
and the caller has not withheld this
information, it will appear on the display. If
the caller withholds this information, you will
see:
X
Accepting: Press button
6
on audio
control unit or on the multifunction steering
wheel.
or
X
Press
W
.
X
Rejecting: Press button
~
on audio
control unit.
or
X
Slide
X V
or rotate
c V d
the audio
controller to select
Reject
, and press
W
to confirm.
The call is rejected.
If you have accepted the call using the audio
control unit, audio controller, or the
multifunction steering wheel, the call will be
conducted via the hands-free system. The
volume of the call can be adjusted
(
Y
page 133).
Further operating functions can be found in
the “Functions during a single-call” section
(
Y
page 167).
You can also accept a call if the audio display
is showing a screen other than the telephone
mode screen. After accepting the call, the
display switches to the phone display. Once
the call is over, the display for the previous
mode will appear again.
Functions during a single call
Switching hands-free microphone on or
off
The menu bar changes when you make or
receive a call. Instead of the
Call Lists
menu item,
Mic Off
or
Mic On
will appear.
X
Switching off: Select Mic Off
.
The following message will flash up on the
display:
The microphone is off
.
When the microphone is switched off the
symbol
Q
appears in the main area.
X Switching on: Select
Mic On
.
The following message will flash up on the
display:
The microphone is on
.
The microphone is switched on and the
symbol
Q
disappears in the main area.
i You can also switch the microphone on or
off by pressing button
8
.
Audio system
167
Controls in detail
X204_AKB; 3; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T19:16:58+02:00 - Seite 167
Z