Mercedes-Benz 2008 SLK-Class, Owner'S Manual

Page: 218 / 273

Changing the bulbs
215
R
Turn signal lamp (front)
R
Reversing lamp
R
Rear foglamp
R
Turn signal (rear)
R
Licence plate lighting
Observe the following points:
R
Use only the bulb types specified here.
R
To prevent a short-circuit, switch off the
lights before changing a bulb.
R
Only hold bulbs with a clean, lint-free cloth.
R
Do not work with wet or greasy fingers.
R
If the new bulb still does not light up, con-
sult a qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
i
Have the headlamp setting checked reg-
ularly at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
Changing the front bulbs
Halogen or bi-xenon* headlamps
1
Housing cover for dipped-beam headlamp
(halogen/bi-xenon headlamps)
2
Bulb holder for turn signal
3
Bulb holder for main-beam headlamp
4
Bulb holder for side/parking lamps
Halogen headlamps
5
Bulb holder for dipped-beam headlamp
Replacing dipped-beam headlamps
(vehicles with halogen headlamps)
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover 1 anti-clockwise and
remove it.
X
Turn bulb holder 5 anti-clockwise and
remove it.
X
Pull the bulb out of bulb holder 5 .
X
Insert the new bulb into bulb holder 5 .
Practical advice
* optional
171_AKB; 3; 4, en-GB
vpfaff7,
2007-11-13T10:50:25+01:00 - Seite 215
Z