Mercedes-Benz 2008 SLK-Class, Owner'S Manual

Page: 240 / 273

Fuses
237
Vehicles with automatic transmission*
X
Turn the key to position 2 in the ignition
lock.
X
Move the selector lever to N.
Fuses
Notes on changing fuses
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions will
fail.
i
Blown fuses must be replaced with fuses
of the same rating (which can be recog-
nised by the colour and amperage) and
which have the amperage specified in the
fuse allocation chart. A Mercedes-Benz
Service Centre will be happy to advise you.
G Risk of fire
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have
the correct amperage for the system con-
cerned. Do not attempt to repair or bridge
faulty fuses. A circuit overload could other-
wise cause a fire. Have the cause traced
and rectified at a qualified specialist work-
shop, e.g. a Mercedes-Benz Service Centre.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. a Mercedes-Benz
Service Centre.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct amperage for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses are located in various fuse boxes:
R
Main fuse box on the driver's side of the
dashboard
R
Fuse box in the engine compartment on the
left-hand side of the vehicle
R
Fuse box in the boot behind the partition
trim
Fuse allocation chart
The fuse allocation chart is in the main fuse
box in the dashboard. The fuse amperage is
also indicated there.
Practical advice
* optional
171_AKB; 3; 4, en-GB
vpfaff7,
2007-11-13T10:50:25+01:00 - Seite 237