Mercedes-Benz 2008 SLK-Class, Owner'S Manual

Page: 104 / 273

On-board computer
101
X
Press the è or · button repeatedly
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example: 2 messages .
X
Press the j or k button to call up a
display message.
You can scroll through the display mes-
sages in sequence. The possible display
messages are explained in the "Practical
advice" section (
Y
page 174).
Settings menu
In the Settings menu, you can use the To
reset: Press reset button for 3 sec-
onds function to restore most settings to the
factory settings. There are also submenus in
which you can make individual settings for
your vehicle.
i
Menu overview: see (
Y
page 94).
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle submenu. The Headlamp mode
function in the Lighting submenu is only
reset if the vehicle is stationary.
X
Press è or · to select the Set-
tings menu.
X
Press and hold reset button J on the left
of the instrument cluster for approximately
three seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
X
Press reset button J again.
The functions of most submenus are
restored to the factory settings.
or
X
If you want to retain the settings, do not
press reset button J a second time.
You will see the Settings menu again after
approximately 5 seconds.
X
Press the è or · button to select a
different menu.
Submenus in the Settings menu
X
Press è or · to select the Set-
tings menu.
X
Press the j button to call up the selec-
tion of submenus.
A submenu appears. There are several sub-
menus.
X
Press the æ or ç button to select a
submenu.
The selected submenu is highlighted.
X
Press the j button to select a function
within a submenu.
X
Press the æ or ç button to change
the setting.
The changed setting is stored.
X
Press the è or ÿ button to select a
different display.
The following tables show the settings you
can make in the individual submenus. You will
Controls
171_AKB; 3; 4, en-GB
vpfaff7,
2007-11-13T10:50:25+01:00 - Seite 101
Z