Mercedes-Benz 2006 CL 500, Operator'S Manual

Page: 276 / 456

275
Operation
Engine compartment
Checking the engine oil level with the
control system
When checking the oil level
앫
the vehicle must be parked on level
ground
앫
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
앫
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
왘
Switch on the ignition (
컄
page 34).
The standard display (
컄
page 142) should
appear in the multifunction display.
왘
Press button
k
or
j
on the mul-
tifunction steering wheel until the fol-
lowing message is seen in the
multifunction display:
One of the following messages will sub-
sequently appear in the multifunction
display:
앫
ENGINE OIL LEVEL
OK
앫
ADD 1.0 QT. TO
REACH MAX. OIL LEVEL
(Canada: 1.0 LITER )
앫
ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
(Canada: 1.5 LITERS )
앫
ADD 2.0 QTS. TO
REACH MAX. OIL LEVEL
(Canada: 2.0 LITERS )
왘
If necessary, add engine oil.
For adding engine oil (
컄
page 278).
For more information on engine oil, see the
“Technical data” section (
컄
page 418) and
(
컄
page 420).
i
If you want to interrupt the checking
procedure, press the
k
or
j
but-
ton on the multifunction steering
wheel.