Mercedes-Benz 2006 CL 500, Operator'S Manual

Page: 56 / 456

55
Getting started
Driving
Single wipe
왘
Press the combination switch briefly in
the direction of arrow
1
to the resis-
tance point.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid
왘
Press the combination switch in the di-
rection of arrow
1
past the resistance
point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
컄
page 282).
i
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened. This protects persons
getting into or out of the vehicle from
being sprayed.
Intermittent wiping will be continued
when
앫
all doors are closed
and
앫
the gear selector lever is in
position
D or R
or
앫
the wiper setting is changed using
the combination switch
i
To prevent smears on the windshield,
wipe with windshield washer fluid every
now and then even when it is raining.
!
If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
앫
For safety reasons, stop the vehicle
in a safe location,
앫
remove SmartKey from the
starter switch
or
앫
turn off the engine by pressing
the KEYLESS-GO* start/stop
button (
컄
page 35) and open
the driver’s door (with the driv-
er’s door open, starter switch is
in position
0 , same as with
SmartKey removed from the
starter switch)
before attempting to remove any
blockage.
앫
Remove blockage.
앫
Turn the windshield wipers on
again.
If windshield wipers fail to function at
all in the combination switch position
I :
앫
Set the combination switch to the
next higher wiper speed.
앫
Have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center.