Mercedes-Benz 2006 CL 500, Operator'S Manual

Page: 173 / 456

172
Controls in detail
Automatic transmission
Gear selector lever one-touch
gearshifting
Even with an automatic transmission, you
can change the gears manually and limit or
extend the gear range for automatic shift-
ing with the gear selector lever in
position
D and driving in the automatic
program mode C or S .
Downshifting
왘
Briefly press the gear selector lever to
the left in the
D- direction.
The transmission will shift from the current
gear to the next lower gear as permitted by
the shift program. This action simulta-
neously limits the gear range of the
transmission (
컄
page 170).
Upshifting
왘
Briefly press the gear selector lever to
the right in the
D+ direction.
The transmission will shift from the current
gear to the next higher gear as permitted
by the shift program. This action simul-
taneously extends the gear range of the
transmission.
Canceling gear range limit
왘
Press and hold the gear selector lever
in the
D+ direction until D reappears in
the tachometer display.
The transmission will shift from the current
gear range directly to gear range
D .
Shifting into optimal gear range
왘
Press and hold the gear selector lever
in the
D- direction.
The transmission will automatically select
the gear range suited for optimal
acceleration and deceleration. This may
involve shifting down one or more gears.
!
Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.
Shift into reverse gear R or parking
position P only when the vehicle is
stopped.
Avoid spinning of a drive wheel for an
extended period when driving off on
slippery road surfaces. This may cause
serious damage to the drivetrain which
is not covered by the Mercedes-Benz
Limited Warranty.
Warning!
G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
i
To avoid overrevving the engine when
the gear selector lever is moved to
the
D- direction, the transmission will
not shift to a lower gear if the engine’s
max. speed would be exceeded.