Mercedes-Benz 2006 CL 500, Operator'S Manual

Page: 389 / 456

388
Practical hints
Flat tire
왘
Take the two-piece wheel wrench out
of the vehicle tool kit tray. Assemble
wheel wrench.
왘
On wheel to be changed, loosen but do
not yet remove the wheel bolts (ap-
proximately one full turn with wrench).
The tube openings are located directly be-
hind the front wheel housings and in front
of the rear wheel housings.
1
Jack support tube cover
왘
Move cover
1
toward rear by pressing
at point indicated by arrow.
왘
Remove cover
1
carefully to avoid
damage to the locking tabs.
1
Jack arm
2
Jack support tube hole
3
Crank
왘
Insert jack arm
1
fully into tube
hole
2
up to the stop.
Warning!
G
Insert the jack arm fully into the jack sup-
port tube hole up to the stop. Otherwise the
vehicle may fall off the jack and cause per-
sonal injury or damage to the vehicle.
컄컄