Mercedes-Benz 2006 CL 500, Operator'S Manual

Page: 199 / 456

198
Controls in detail
Power windows
왘
Switch on the ignition (
컄
page 34).
Opening the power windows
왘
Press switch
1
to
4
at the
symbol
k
to the resistance point.
The corresponding window will move
downwards until you release the
switch.
Closing the power windows
왘
Press switch
1
to
4
at the
symbol
j
to the resistance point.
The corresponding window will move
upwards until you release the switch.
Fully opening the power windows
(Express-open)
왘
Press switch
1
to
4
at the
symbol
k
past the resistance point
and release.
The corresponding window opens com-
pletely.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
i
You can also open or close the side
windows and power tilt/sliding sunroof
using the SmartKey or SmartKey with
KEYLESS-GO*, see “Summer opening
feature” (
컄
page 200) and
“Convenience closing feature”
(
컄
page 200).
Depending on current position, the win-
dows may also open or close when the
air recirculation button
,
or the
charcoal filter button
e
in the
climate control panel (
컄
page 185) is
pressed and held.
i
Operating the rear side windows from
the rear is not possible if you activate
the override switch (
컄
page 78).
i
With the SmartKey in starter switch po-
sition
0 or removed from the starter
switch, the door windows can be oper-
ated:
앫
until you open the driver’s or pas-
senger door
앫
for at least 5 minutes
Warning!
G
If you press and hold the switch up when
closing a door window, and upward move-
ment of the window is blocked by some ob-
struction including but not limited to arms,
hands, fingers, etc., the automatic reversal
will not operate.
컄컄