Mercedes-Benz 2005 C 240 Operator'S Manual Download Page 56

Page: 56 / 426

Getting started

Driving

Problems while driving

The engine runs erratically and misfires

앫

An ignition cable may be damaged.

앫

The engine electronics may not be op-
erating properly.

앫

Unburned gasoline may have entered
the catalytic converter and damaged it.

왘

Give very little gas.

왘

Have the problem repaired by an au-
thorized Mercedes-Benz Center as
soon as possible.

The coolant temperature is
above 248°F (120°C)

The coolant is too hot and is no longer
cooling the engine.

왘

Stop the vehicle as soon as possible
and turn off the engine. Allow engine
and coolant to cool.

왘

Check the coolant level and add
coolant if necessary (

컄

page 275).

In case of accident

If the vehicle is leaking gasoline:

왘

Do not start the engine under any cir-
cumstances.

왘

Notify local fire and/or police authori-
ties.

If the extent of the damage cannot be de-
termined:

왘

Notify an authorized Mercedes-Benz
Center.

If no damage can be determined on the

앫

major assemblies

앫

fuel system

앫

engine mount:

왘

Start the engine in the usual manner.

Summary of Contents for 2005 C 240











































































































































































































































































































































































































































Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands

Mercedes-Benz 2005 C 240, Operator'S Manual

Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands