Mercedes-Benz 2005 C 240 Operator'S Manual Download Page 300

Page: 300 / 426

298

Practical hints

What to do if …

Problem

Possible cause

Suggested solution

The yellow ESP warning lamp
comes on while driving.

The ESP is deactivated.

Risk of accident!

Adapt your speed and driving to the
prevailing road, weather and traffic
conditions.

왘

Switch the ESP back on (

컄

page 81).

If the ESP cannot be switched back on,
have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.

The yellow ESP warning lamp
flashes while driving.

The ESP or traction control has come into
operation because of detected traction loss
in at least one tire.

왘

When driving off, apply as little
throttle as possible.

왘

While driving, ease up on the
accelerator.

왘

Adapt your speed and driving to the
prevailing road and weather
conditions.

왘

Do not deactivate the ESP.
Exceptions: (

컄

page 81).

Failure to follow these instructions
increases the risk of an accident.

Summary of Contents for 2005 C 240











































































































































































































































































































































































































































Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands

Mercedes-Benz 2005 C 240, Operator'S Manual

Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands