Mercedes-Benz 2005 C 240 Operator'S Manual Download Page 359

Page: 359 / 426

357

Practical hints

Fuses

Aids for changing fuses

Fuse chart

The fuse chart is found in the main fuse
box in the passenger compartment
(

컄

page 357). The amperages of the fuses

are also given there.

Spare fuses

Spare fuses are found in the vehicle tool kit
in the cargo compartment (

컄

page 359).

Fuse extractor

The fuse extractor is found in the vehicle
tool kit in the cargo compartment
(

컄

page 359).

Main fuse box in passenger
compartment

The main fuse box is located in the passen-
ger compartment on the driver’s side of
the cockpit.

Main fuse box cover

Opening fuse box

왘

Open the driver’s door.

왘

Pull fuse box cover

open with a

screw driver or similar tool (see arrow).

왘

Remove fuse box cover

rearward.

Closing fuse box

왘

Attach fuse box cover

in the front.

왘

Fold fuse box cover

in until it

engages.

Summary of Contents for 2005 C 240











































































































































































































































































































































































































































Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands

Mercedes-Benz 2005 C 240, Operator'S Manual

Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands