Mercedes-Benz 2005 C 240 Operator'S Manual Download Page 129

Page: 129 / 426

127

Controls in detail

Control system

왘

Press button

repeatedly

until the desired channel is found.

Operate the CD player*

왘

Turn on the radio and select the CD
player (

컄

page 193).

Vehicles with COMAND*:
Refer to separate operating
instructions.

왘

Press button

repeatedly

until the settings for the CD currently
being played appear in the
multifunction display.

Current CD (for CD changer*)

Current track

왘

Press button

repeatedly

until the desired track is selected.

Feature description is based on
preliminary information available at
time of printing.

For more information on satellite radio
operation, see “Introduction to satellite
radio* (USA only)” (

컄

page 188).

Vehicles with COMAND*:
Refer to separate operating
instructions.

To select a CD from the magazine,
press a number on the audio system or
the COMAND* system key pad located
in the center dashboard.

Summary of Contents for 2005 C 240











































































































































































































































































































































































































































Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands

Mercedes-Benz 2005 C 240, Operator'S Manual

Search results

Summary of Contents for 2005 C 240

Reviews:

Related manuals for 2005 C 240

Brands by name

Popular brands